-40%

Gates PowerGrip Power grip Thermoplastic hose clamp 1/2-11/16" 32915

$ 1.89

Availability: 90 in stock
  • UPC: 072053111583
  • Condition: New
  • Brand: Gates
  • Manufacturer Part Number: 32915

    Description

    Gates PowerGrip Power grip Thermoplastic hose clamp 1/2-11/16" 32915
    a.imagelink {color:#0000FF;} a:hover.imagelink {color:#0000FF;} a:visited.imagelink {color:#800080;} a.imagelink img.auctionimage { border: 2px solid #0000FF; } a:visited.imagelink img.auctionimage { border: 2px solid #800080; }
    New Gates Power Grip Thermoplastic Hose Clamp
    Fits hoses with 1/2" to 11/16" OD
    Nominal Hose ID 1/4"
    Recommended for all cooling applications
    Size SB15
    part #32915
    Quantity: Each
    Picture may not represent actual size
    Made of a heat-sensitive material, Gates PowerGrip™ SB clamp solves coolant leakage problems in both silicone and standard rubber wall hoses, clamps will even seal out-of-round fittings
    Gates thermoplastic clamp maintains a dynamic tension so that it never needs re-tightening. Whenever the engine reaches operating temperature, the shrink forces of PowerGrip SB readjust to a consistent clamping force. In addition, its clamping force increases as the temperature drops below 40 degrees F, thereby tightening the connection, eliminating cold weather leaks.
    Installation is fast and easy using a heat gun, including hard-to-reach places. Heat-gun attachments permit installation in confining areas that would be extremely difficult to reach using a screwdriver on conventional worm-drive screw clamps.
    The PowerGrip SB hose clamp features a smooth surface that will not rust, corrode, or result in cut fingers during installation. PowerGrip SB hose clamps are completely resistant to all automotive fluids including oil, antifreeze and even brake fluid.
    Wider than conventional clamps, PowerGrip SB hose clamps can be positioned over the raised bead on the end of the fitting nipple - even cast metal.
    PowerGrip SB clamps are readily removed with Gates' specially-designed clamp removal tool. The clamps also can be removed using a soldering iron to melt through the thermoplastic material.
    Sizes are available for 1/4 through 3-1/8 inch I.D. hose.
    We accept Paypal only at this time
    We ship Via USPS, UPS & FedEX  we cannot guarantee a specific shipping carrier.  In addition to shipping form our location we also drop ship items from 22 warehouses across the country in order to get you parts to you in the quickest possible time.  Most orders are processes within 72 hours, weekends and holiday not included.
    Return Policy
    We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All returns must be received in original packaging, with original manuals and ancillary materials in undamaged and saleable condition. Prior authorization must be given before any return can be made.  A 20% restocking fee applies to all returned orders.  Shipping and handling costs will not be refunded.
    ALL returns require a Return Merchandise Authorization Number (RMA) with the returned merchandise, Please contact us for  an RMA number and shipping instructions for your return.
    Images sell!
    Get Supersized Images & Free Image Hosting
    Get Auctiva's Listing Templates
    on your items with a few clicks.
    Attention Sellers - Get Templates
    Image Hosting, Scheduling at Auctiva.com.
    Track Page Views With
    Auctiva's FREE Counter