Lower Repair quarter panel corner 59 1959 Cadillac rear fender Eldorado series62

Description

NEW PRODUCT
Lower repair quarter panel corner 59 1959 Cadillac rear fender part
Order two if you need both sides, this auction is for 1 side only (when ordering 1 make sure the
mention
LH or RH side )
Hand Made by BMF fabricating / Canada
This is the most complicated piece of the rear quarter and most common to rust out or has been filled with bondo. With this panel you will be able to repair your lower quarter corner instead of ordering the large panels and also save in shipping cost.
We also sell the full lower sets of lower quarter panels on our other EBAY auctions if you need a larger repair area.
Fits all below 1959 models: 4 doors  2 doors
Convertibles
NOTE:
Every panel is HANDMADE
to "as close as possible " to factory specs.
We take proud in building our panels and make sure they are well packaged.
Building and
restoring
panels since 1984
SHIPPING:
Flat Rate shipping, packaging and Handling USA and Canada
USD
Contact us for International SHIPPING cost before you purchase.
Thank you
INSTALLATION:
Panels are made to be installed by a licensed
professional
body-shop
or skilled welder.
If you would like to insure the parts for shipping we gladly arrange this at actual postal / courier additional cost . We do not charge for packaging, only for the actual shipping cost.
ASK US FOR OUR NEW 1959 CADILLAC SHEET METAL PARTS LINE.
Available soon !!
#1. Fender skirts  /  Outer skin only
#2. Fender skirts  / Full skirt with brackets and locking mechanism.
#3. Fender skirt quarter panel housing section / Skin only
#4. Fender skirt quarter panel housing section / Full panel with inner profile and skirt brackets.      #5. Front lower fender section
#6  Repair corner lower quarter
Contact us for more information
about availability.
We restore sheet metal panels of classic cars , if you have panels that are obsolete and you cannot find anymore, Send us your old panel to restore.
NOTE 2:
Regarding Legal and Minor Imperfections: The sheet metal you receive may have scratches, dings, small dents and other minor imperfections, which are considered normal sheet metal characteristics due to the nature of the product.
We do not consider these minor imperfections as damage.
These imperfection "IF" they accord will be easily corrected during the priming and filling phase of your sheet metal installation.
As all panels are made out of sheet metal please note that even with our care sharp edges may accord and gloves need to be worn all the time when handling sheet metal parts.
All sheet metal panels may require some sort of manipulation during installation.
Every panel that we sell is INSPECTED and carefully packaged and protected against damage that may occur during normal shipping.
We do not applied / except any warranties or damages that may accord with this product during shipping, handling, storage and installation.
If the product does not reach you in the condition we have send it you will need to contact us within 24 hours, all other claims or problems will be denied.
If you claim damages they cannot not be any higher than the cost of the material, no refunds on
labor
and part or parts  related damages.
When you purchase and your payment has been accepted you agreed to all information above.